8' Black Pontoon Deck Trim

    Our classic Deck Trim but with a Black Anodized finish and is a L shaped deck trim.  For aftermarket use, the L channel is much easier to work with than old F trim that sandwiched the edge of the deck.  If you change carpet to the modern Woven Vinyl flooring the old F channel usually will not fit.  The purpose of the Deck Trim is to cover the riser brackets, the L trim does the job without the worry of fitting over the new flooring and decking.  Deck Trim dimensions are 2 3/4" across the top and 3 1/4" down the side by 8' long.  Piece together along the sides of the pontoon boat for a seamless look.

    The best way to install deck trim is with a fastener through the deck trim, carpet and decking into a cross channel.  Just through the decking will suffice but by catching a cross channel gives you have a super strong installation.  Each piece of our 8’ channel comes with 3-self tapping deck screws.  If your Pontoon boat is 24' long, you will need 8 total pieces.   Three up each side, one for the back and one for the front.  These are specifically designed to work with our black square corner caps on the deck corners, but will work with others as well.